Lesson 1Thermal behaviour and overheating causes during charge: internal resistance, ventilation, charger profiles, ambient temperature effectsExamines how traction batteries warm up during charging, emphasising internal resistance, charger profiles, airflow, and surrounding temperature. Highlights spotting unusual heating patterns and establishing safe boundaries to avoid damage or heat incidents.
Internal resistance and heat generationInfluence of charger current profilesRole of ventilation and airflow pathsAmbient temperature and seasonal effectsRecognising abnormal temperature riseLesson 2Recordkeeping and battery lifecycle management: serial tracking, warranty claims, replacement planning, and ROI for battery replacement vs. refurbishmentDeals with monitoring batteries over their lifecycle using serial numbers, logs, and software. Covers recording faults, backing warranty claims, scheduling replacements, and weighing costs and ROI of new batteries against refurbishing.
Serial number and asset ID trackingLogging faults, tests, and repairsSupporting warranty and service claimsPlanning replacements and spare poolsROI of replacement versus refurbishmentLesson 3Daily and shift-level battery inspection checklist: visual checks, terminal condition, vent caps, electrolyte level (if applicable), and physical damage indicatorsOffers a hands-on daily and shift-level inspection routine for traction batteries. Includes visual inspections, terminals, vent caps, electrolyte levels, cables, and casings, to spot damage or leaks before they lead to breakdowns or injuries.
Pre-shift visual walk-around stepsChecking terminals and connectorsInspecting vent caps and traysVerifying electrolyte levels safelyIdentifying leaks and case damageLesson 4Types of traction batteries used in forklifts (lead-acid, AGM, gel, lithium-ion): chemistry, nominal voltages, capacities, and discharge characteristicsIntroduces primary traction battery chemistries in forklifts, such as flooded lead-acid, AGM, gel, and lithium-ion. Compares typical voltages, capacities, discharge curves, and common uses, pointing out advantages, drawbacks, and safety requirements.
Flooded lead-acid construction basicsAGM and gel sealed battery featuresLithium-ion modules and BMS roleVoltage, capacity, and pack layoutsDischarge curves and use casesLesson 5Battery maintenance tasks and schedules: watering, cleaning terminals, torqueing connections, charge cycle logging, calendar vs. cycle maintenanceOutlines regular traction battery maintenance tasks and timetables. Covers watering, cleaning, torque inspections, and logging charge cycles, contrasting calendar-based and cycle-based approaches to prolong life and cut unexpected downtime.
Watering intervals and safe methodsCleaning cases, tops, and terminalsTorque checks on lugs and busbarsLogging charge and discharge cyclesCalendar versus cycle-based planningLesson 6Managing overheating and charging faults: detection, immediate actions, charger fault codes, thermal management, and cooling strategiesAddresses spotting overheating and charge faults via sensors, charger screens, and error codes. Outlines prompt safe responses, isolation steps, and effective thermal control and cooling techniques to safeguard batteries and adjacent gear.
Typical charger and battery fault symptomsReading and interpreting charger fault codesImmediate shutdown and lockout actionsUsing fans, spacing, and cooldown periodsWhen to remove a battery from serviceLesson 7Battery specifications and ratings: C-rate, ampere-hour (Ah), state of charge (SoC), depth of discharge (DoD), and expected runtime calculationsClarifies essential battery ratings on forklift labels and spec sheets, like C-rate, ampere-hours, state of charge, and depth of discharge. Demonstrates estimating runtime and matching batteries to truck workloads.
Reading battery labels and nameplatesC-rate and its impact on runtimeAmpere-hour capacity and sizingState of charge and depth of dischargeRuntime estimation for duty cyclesLesson 8Safe handling, spill/leak response and disposal: PPE for acid and lithium incidents, neutralisation, spill containment, and local hazardous waste rulesDetails secure handling of traction batteries, including PPE, lifting, and moving. Addresses acid and electrolyte spills, lithium leaks, neutralising, containing, cleaning up, and following local hazardous waste and recycling laws.
Required PPE for acid and lithium risksSafe lifting, moving, and storageAcid spill neutralisation proceduresContainment and cleanup materialsDisposal and recycling regulationsLesson 9Charging area layout and safety rules: ventilation, signage, fire suppression considerations, separation distances, grounding and cable routingCovers secure setup and running of charging zones, including ventilation, signs, fire safeguards, and spacing. Tackles grounding, cable paths, eyewash and shower spots, and keeping sparks distant.
Ventilation and hydrogen dilution needsRequired signage and access controlFire suppression and extinguisher typesSeparation from offices and trafficGrounding, cabling, and trip hazardsLesson 10Relevant standards and sources: manufacturer battery manuals, OSHA/NFPA guidance for battery rooms, and battery manufacturer safety bulletinsSummarises vital standards and advice for traction battery rooms and charging spots. Reviews maker manuals, OSHA and NFPA guidelines, and safety notices, explaining how to find, understand, and implement them on site.
Using manufacturer battery manualsOSHA rules for charging operationsNFPA guidance for battery roomsLocating safety bulletins and updatesDocumenting site compliance stepsLesson 11Handling low runtime and capacity fade: diagnosing sulfation, cell imbalance, parasitic loads, and end-of-life criteriaConcentrates on pinpointing short runtime and capacity drop in traction batteries. Examines sulfation, cell unevenness, parasitic drains, and end-of-life signs, connecting test info to real choices on fixing, reconditioning, or swapping.
Collecting runtime and charge historyIdentifying sulfation and undercharge patternsDetecting weak or imbalanced cellsFinding parasitic loads on parked trucksEnd-of-life criteria and replacement callsLesson 12Battery charging systems and safe charging practices: charger types, charge algorithms, float vs. fast charge, equalisation chargingExplains forklift battery charging setups, covering standard, opportunity, and quick chargers. Reviews charge methods, equalisation, float settings, and safe habits that stop overcharging, gassing, and early battery wear.
Conventional, opportunity, and fast chargersCharge stages and control algorithmsEqualisation charge goals and timingFloat charging and storage practicesPreventing overcharge and gassingLesson 13Periodic battery testing and diagnostics: specific gravity/hydrometer testing, conductance/impedance testing, capacity tests, voltage under loadDescribes regular and advanced traction battery tests, like specific gravity, conductance, impedance, and capacity evaluations. Explains load voltage and interpreting outcomes to catch weak cells, unevenness, or concealed flaws early.
Safe sampling for specific gravity testsOpen-circuit and loaded voltage checksConductance and impedance test basicsFull capacity and discharge testingInterpreting test trends over time
