Lesson 1Intermediate checks during each step: measuring weight, balance, straightness, and visual inspection pointsHere you will set up regular checks at each stage. You will measure weight, balance, straightness, and stiffness, note down values, and use visual checks to spot issues early before they can't be fixed.
Setting up a measurement checklistWeighing stick, frog, and assembled bowBalance point measurement and adjustmentStraightness checks against reference edgesRecording data and interpreting deviationsLesson 2Drilling and fitting hardware: screw channel, eyelet installation, alignment checks; tools: drills, reamers, tapping toolsThis part covers drilling the screw channel, fitting eyelets, and aligning fittings so the frog slides smoothly. You will learn tool choices, drilling order, tapping methods, and fixing small alignment issues safely.
Layout of screw channel centerlinePilot drilling and step drilling strategyTapping threads and lubricants usedEyelet fitting, depth, and thread engagementAlignment checks and minor correctionsLesson 3Shaping and tapering the stick: longitudinal and transverse planing, spokeshaves, scrapers, filing; critical checks: cross-section profiles, straightness, symmetryThis part covers shaping and tapering the stick with planes, spokeshaves, and scrapers. You will create lengthways and sideways tapers, refine cross-sections, and keep straightness and symmetry with regular checks.
Marking reference lines and tapersLongitudinal planing sequence and passesTransverse shaping and octagonal facetsScraping, filing, and surface refinementStraightness and symmetry verificationLesson 4Wood selection and preparation: visual and acoustic inspection, moisture content measurement, rough cutting and seasoning considerations; tools: saws, planes, calipersLearn to select, test, and prepare bow wood, focusing on grain, density, and sound response. You will check moisture, rough cut blocks, and plan seasoning while using saws, planes, and calipers safely and precisely.
Visual grain, runout, and defect assessmentBasic acoustic tap testing and density checksMoisture content measurement and target rangesRough cutting billets and orienting the stickSeasoning schedules and storage conditionsLesson 5Tip making and head details: carving tip, tip plate fitting, rolling and finishing head profile; tools: knives, needle files, chiselsThis part explains shaping the bow head, fitting the tip plate, and refining the shape. You will carve the tip, set in and level the plate, curve the head outlines, and finish surfaces using knives, chisels, and needle files safely.
Rough carving the head and tip outlineCutting and fitting the tip plate bedGluing and flushing the tip plate edgesRolling head profile and chamfer transitionsFinal head surface cleanup and detailingLesson 6Frog fabrication and fitting: cutting, mortising, dovetailing, slide shaping and eyelet seating; tools: chisels, files, lathes, gaugesLearn to make and fit the frog, including cutting to size, mortising, dovetailing, shaping the slide, and seating the eyelet. Tool control, reference surfaces, and exact gaps are key for smooth, rattle-free action.
Squaring frog block and layout linesCutting mortises for hair and screwForming dovetail and slide channelShaping and fitting the slide and linerEyelet seating, clearance, and travelLesson 7Finishing and polishing: shellac/application methods, rubbing and buffing, surface protectionLearn finishing methods using shellac and matching coatings. You will prepare surfaces, apply thin even layers, rub between coats, and polish to a set shine while keeping feel, protection, and clear looks.
Surface preparation and pore fillingShellac mixing and application methodsDrying times and rub-out techniquesBuffing tools and controlled sheen levelsTouch-ups and long-term surface careLesson 8Hairing procedure and securing hair: selection, bundling, glueing to mortises, adjuster setup; tools: clamp blocks, staple techniques, glue applicationStudy the full hairing process, from choosing and sorting hair to bundling, tying, gluing into mortises, and setting the adjuster. Focus is on tension balance, clean work, and firm fixing with clamps and glue handling.
Selecting, sorting, and aligning bow hairForming bundles and tying end knotsPreparing mortises and glue applicationClamping, drying, and trimming hair endsAdjuster setup and tension equalizationLesson 9Cambering (heat and bending) and stabilisation: heat sources, bending forms, measuring camber and residual stresses; tools: bending iron, clamps, radius gaugesExplore cambering with controlled heat and bending forms. You will learn safe heating, bending steps, measuring camber curves, and stabilising the stick while watching for twist, springback, and leftover stresses.
Selecting heat source and safety setupHeating zones and bending orderUsing bending forms and clamping pointsMeasuring camber curve and reference arcsCooling, stabilization, and springback checksLesson 10Winding, grip and final shaping: wire winding techniques, thumb leather or grip application, final sanding and finishing; tools: winding mandrel, pliers, burnishersThis part details winding, grip fitting, and final shaping. You will practise wire or silk winding, fit thumb leather or synthetic grips, refine the handle shape, and burnish surfaces while safeguarding earlier work.
Planning winding length and terminationWire and silk winding techniquesThumb leather cutting and gluing stepsHandle shaping and ergonomic refinementBurnishing and protecting adjacent areas
