Lesson 1Tool restraint and dropped object prevention: lanyards, tool holsters, tool bags, mesh debris netting, and edge containmentDis section address preventing dropped tools and debris in rope access work. It cover tool lanyards, holsters, and bags, plus mesh netting and edge containment. Learners go plan exclusion zones and select rated restraint systems for various tools.
Dropped object risk assessmentTool lanyards and attachment pointsHolsters, buckets, and tool bagsMesh netting and edge containmentExclusion zones and barricadingInspection and rating of restraintsLesson 2Connectors and hardware: locking carabiners, shackles, pulleys, rope protectors, edge rollers, and inspection criteriaDis section cover connectors and hardware used in rope access, including locking carabiners, shackles, pulleys, and edge protection. It explain strength ratings, gate types, correct orientation, inspection criteria, and retirement decisions.
Carabiner types and locking systemsMajor, minor axis, and cross-loadingShackles, maillons, and compatibilityPulleys, sheave size, and efficiencyRope protectors and edge rollersHardware inspection and retirementLesson 3Rope types and inspection: static vs. dynamic ropes, diameters, splice methods, inspection intervals, and retirement criteriaDis section explain rope construction, static and dynamic behavior, and suitable diameters for industrial access. It detail inspection intervals, damage indicators, splice and termination methods, and clear retirement criteria for safe removal.
Static vs dynamic rope performanceRope diameters and handling limitsSheath, core, and construction featuresSplice, sewn termination, and knotsInspection intervals and damage signsRetirement criteria and traceabilityLesson 4Primary vs. secondary systems: working line, backup/backup belay systems, redundancy principlesDis section define primary working lines and secondary backup systems, explaining how redundancy reduces single-point failures. It cover independent paths, load sharing, and correct rigging to maintain continuous protection during all rope access tasks.
Working line roles and limitationsBackup line and belay functionsRedundancy and single-point failureSystem independence and separationLoad sharing and rigging strategyChangeovers while maintaining backupLesson 5Anchor point selection: load capacity, anchor types (structural, engineered, temporary), testing methods, pull-out calculationsDis section explain how to identify, test, and rate anchor points for rope access. It compare structural, engineered, and temporary anchors, cover load paths, pull-out calculations, proof testing, and documentation needed to verify anchor suitability.
Structural vs engineered anchor typesTemporary anchors and use limitsLoad paths and direction of pullAnchor strength and safety factorsPull-out and shear calculationsInspection, testing, and recordsLesson 6Harnesses and body support: sit vs. full-body harness selection, attachment points, suspension comfort and rescue compatibilityDis section focus on harness selection and body support for rope access. It compare sit and full-body harnesses, explain attachment points, suspension comfort, work positioning, and ensure compatibility with rescue and evacuation systems.
Sit vs full-body harness selectionFront, side, and dorsal attachment useSizing, adjustment, and body fitSuspension trauma and mitigationWork positioning and comfort setupRescue and evacuation compatibilityLesson 7Descent and ascent devices: mechanical descenders, friction devices, autoblock backups, and manufacturer-specific recommendationsDis section explain descent and ascent devices, including mechanical descenders, friction devices, and backup methods. It cover threading, control techniques, anti-panic features, and di importance of following manufacturer instructions and limits.
Types of descenders and functionsFriction control and heat managementAutoblock and backup techniquesAscent devices and progress captureChangeovers between up and downManufacturer instructions and limitsLesson 8Backup systems and fall limiting: rope-grabs, self-tending devices, deviation protection, and fall-arrest distancesDis section focus on backup devices and methods wey limit fall distance and arrest forces. It compare rope-grabs and self-tending devices, explain correct placement, deviation use, and how to calculate safe clearances and allowable fall-arrest distances.
Types of rope-grabs and backup devicesDevice orientation and compatibilitySelf-tending function and limitationsUse of deviations and re-anchorsClearance and fall distance planningArrest forces and injury preventionLesson 9Personal protective equipment (PPE): helmets, eye protection, gloves, hi-vis clothing, footwear, and hearing protection for façade workDis section detail PPE required for rope access façade work, including helmets, eye and hearing protection, gloves, hi-vis clothing, and footwear. It explain selection, fit, compatibility with other gear, inspection, and replacement criteria.
Helmet standards and chinstrapsEye and face protection optionsGlove types and dexterity balanceHi-vis clothing and weather layersFootwear grip and ankle supportPPE inspection and replacement
