Lesson 1Powering and earthing: transformer sizing, battery capacity estimation, fused circuits and tamper circuitsCovers power and grounding for steady alarm work. Explains transformer size, battery power estimates, fused lines, earthing methods, and tamper checks for power and box access.
Calculating total system current drawTransformer and PSU sizing rulesBattery capacity and standby durationEarthing and surge protection methodsFuses, PTCs, and tamper loop wiringLesson 2Passive infrared (PIR) motion detectors: detection range, mounting height, pet-immunity considerations, placement to minimize nuisance triggersExplains how PIR motion detectors work, their coverage areas, and datasheet details. Focuses on fitting height, angle, pet tolerance limits, and smart placement to cut down needless alarms from heat or movement.
How PIR sensors detect infrared changesReading range and coverage specificationsMounting height and tilt for full coveragePet-immunity ratings and real limitsAvoiding drafts, heaters, and moving drapesLesson 3Glass break detectors: acoustic vs shock sensors, mounting locations and coverage patterns for large living-room windowsExplains glass break sensor tech and best spots. Compares sound and shock types, covers patterns, fitting places, and testing for big parlour and curved windows.
Acoustic versus shock detector principlesCoverage radius and line-of-sight needsMounting on ceilings, walls, or framesDealing with curtains and soft furnishingsFunctional testing with glass break testersLesson 4Magnetic contacts: types, installation positions on doors and windows, reed switch wiring and mounting best practicesCovers magnetic contact kinds and reed switch operation. Explains right spots on doors and windows, cable runs, end-of-line wiring, and fitting tips for lasting alignment.
Surface, recessed, and heavy-duty contactsReed switch operation and polarity issuesBest positions on doors and window sashesCable routing and strain relief methodsEOL wiring and loop supervision optionsLesson 5Shock/vibration sensors for the balcony and secondary glazing: sensitivity settings and sitingDescribes shock and vibration sensors for doors, windows, and balcony frames. Covers types, fitting surfaces, sensitivity tweaks, cable paths, and tests to spot forced entry without false alerts.
Piezo and mechanical shock sensor typesMounting on frames, glass, and masonrySetting sensitivity and test proceduresZoning strategies for multiple openingsAvoiding nuisance alarms from normal useLesson 6Communication modules: options (telephone line, GSM/GPRS, IP/ethernet), redundancy strategies and general programming conceptsReviews alarm signal modules like landline, GSM, GPRS, and IP. Explains backups, line checks, power needs, and basic setup for report formats and account codes.
PSTN, GSM, GPRS, and IP path overviewSingle, dual, and triple path strategiesSIM management and data plan concernsProgramming formats and account codesSupervision timers and fault reportingLesson 7Siren/pa horn selection and placement: internal vs external, mounting height, decibel recommendations and tamper protectionFocuses on siren and horn picking, inside vs outside, sound levels. Covers decibels, height, tamper guards, and local rules for home setups.
Indoor versus outdoor sounder choicesDecibel levels and tone characteristicsMounting height and direction of soundTamper switches and cable protectionCompliance with noise and timing rulesLesson 8Surface and recessed door/garage contacts: selection for external garage and internal kitchen doorCovers picking and fitting surface and hidden contacts for doors and garage. Discusses weather ratings, cable shields, alignment, and zoning for outside and inside entries.
Choosing contacts for external garagesContacts for internal interconnecting doorsEnvironmental and impact resistance needsMounting hardware and alignment checksZoning strategies for perimeter doorsLesson 9Keypads and touchpads: types, mounting locations, illuminated keys, accessibility for adults and older childrenDetails keypad and touchpad types, screens, and user designs. Explains fitting height, lights, and ease so adults, big children, and guests can arm, disarm, and check status easily.
Fixed, remote, and wireless keypad typesDisplay, indicator, and buzzer functionsMounting height and wall location choicesBacklighting, key size, and tactile feedbackAccessibility for children and older adultsLesson 10Control panel fundamentals: typical inputs/outputs, power and battery backup, zone wiring considerations (EOL resistors), enclosure placementIntroduces control panel parts, inputs, outputs. Covers power, battery standby, zone wiring with EOL resistors, box spots, and splitting user and tech areas.
Main board layout and terminal functionsAuxiliary power and current budgetingZone types and EOL resistor schemesEnclosure placement and cable entryService access and labeling standardsLesson 11Panic/auxiliary devices: wired/wireless panic buttons and 24-hour medical/panic zonesLooks at panic and extra devices for emergencies. Compares wired/wireless buttons, hold vs press types, 24-hour medical and force zones, and spots to avoid mistakes.
Types of panic and medical alert buttonsWired versus wireless panic device choices24-hour zone types and reporting formatsPlacement to avoid accidental activationsTesting and labeling for user confidenceLesson 12Dual-technology and curtain/edge PIRs: when to use narrow/curtain sensors for windows and balcony coverageExplores dual-tech and curtain PIRs for edge protection. Covers detection ways, lens shapes, spots for windows and balconies, false alarm cuts, and matching specs to site.
Dual-technology PIR operating principlesCurtain lens patterns and coverage anglesSelecting sensors for windows and balconiesMounting heights and tilt for narrow beamsReducing false alarms from outdoor movement
