Lesson 1Filling chips and edge losses: reversible fillers, grain filling for open-grain species, color-matching techniquesUnderstand how to fill chips, edge losses, and open grain using reversible fillers and matching materials, then adjust colour and texture with careful grain filling and colour-matching so repairs blend unseen with surrounding wood.
Choosing reversible versus permanent fillersBuilding fills for edges and corner lossesGrain filling open-pore species evenlyShaping and sanding fills flush to surfacesColor-matching fills with stains and pigmentsLesson 2Finishing details: rubbing out, satin vs. gloss levels, burnishing, waxing and buffingExplore how to refine cured finishes through rubbing out, control shine from satin to gloss, and master burnishing, waxing, and buffing techniques that improve clarity, depth, and feel without cutting through the finish.
Leveling cured finishes before rub-outAbrasives and lubricants for rubbing outManaging satin, semi-gloss, and gloss levelsBurnishing techniques for edges and high spotsWax selection, application, and buffing methodsLesson 3Hardware reinstallation and stabilizing moving parts, final alignment and drawer fit adjustmentsReinstall hardware and stabilise moving parts by aligning hinges, pulls, and locks, adjusting drawer and door fit, and fixing twisting or sticking so the restored piece works smoothly and safely in daily use.
Cleaning and lubricating original hardwarePositioning and piloting for new screwsAligning doors, hinges, and catchesAdjusting drawer runners and slidesStabilizing wobbly legs and moving partsLesson 4Finish removal options: chemical strippers (types, dwell time), heat gun methods, solvent sanding — techniques to avoid veneer damageCompare finish removal methods, including chemical strippers, heat guns, and solvent-assisted sanding, focusing on dwell times, neutralisation, and scraper control to avoid veneer damage, raised grain, or base softening.
Evaluating existing finish and substrate risksChoosing between solvent and caustic strippersControlling dwell time and safe scrapingHeat gun use without scorching veneerNeutralizing residues before refinishingLesson 5Client handover: long-term care, humidity recommendations, cleaning products to avoidPrepare clients for long-term success by explaining real wear expectations, humidity and light advice, safe cleaning routines, and products to avoid, while recording finishes and giving clear written care instructions.
Explaining realistic wear and maintenanceHumidity, temperature, and light guidelinesApproved cleaners and products to avoidWritten care sheets and finish documentationScheduling follow-up checks and touch-upsLesson 6Repairing structural issues: regluing joints with hide glue, reinforcing weakened substrates, re-screwing and doweling protocolsLearn how to diagnose and fix loose or failed joints using hot hide glue, strengthen weak bases, and apply correct re-screwing and doweling methods that respect original building while restoring full structural strength.
Assessing loose joints and failed adhesivesPreparing and heating traditional hide glueRegluing mortise-and-tenon and dowel jointsReinforcing weakened substrates and railsRe-screwing, plugging, and redrilling protocolsLesson 7Coating application: number of coats, dry times, sanding between coats, humidity and temperature controlGain control over coating application by planning coat numbers, film build, and dry times, sanding between coats, and managing workshop humidity and temperature so finishes cure well, stay defect-free, and achieve desired shine.
Planning number of coats and target film buildBrushing, wiping, and spraying techniquesFlash, recoat, and full cure time managementSanding between coats for adhesion and levelHumidity, temperature, and dust controlLesson 8Preparation: cleaning methods for greasy grime, protein stains, and surface dirt; masking and protecting non-wood partsMaster safe, thorough cleaning before refinishing by identifying greasy dirt, protein stains, and stuck dirt, selecting proper solvents or detergents, and masking or protecting non-wood parts from moisture and chemical harm.
Identifying grime, wax, and protein residuesDetergent, solvent, and emulsifier selectionStepwise cleaning workflow and dwell timesRinsing, drying, and preventing water damageMasking metal, upholstery, and glass partsLesson 9Applying a period-appropriate finish: choosing between shellac, oil/varnish blend, or wiping oils with rationaleLearn to choose and apply period-appropriate finishes like shellac, oil and varnish blends, or wiping oils, understanding their look, repairability, and historical context to match the piece’s era and client expectations.
Reading style and era to guide finish choiceShellac cuts, padding, and brushing methodsOil and varnish blend mixing and wipingUsing wiping oils for subtle, low-build looksBalancing authenticity with durability needsLesson 10Surface preparation and sanding sequences: grit progression, feathering around veneer edges, avoiding over-sandingDevelop a strict sanding workflow that respects veneers and shapes, using correct grit progression, feathering around thin areas, and avoiding over-sanding that can cause waves, burn-through, or loss of sharp design details.
Planning grit progression by wood and finishHand vs. machine sanding and pad selectionFeathering near veneer edges and inlaysMaintaining profiles, beads, and carvingsSpot repairs without telegraphing patches
