Lesson 1Documentation and manuals: reading the tractor and implement operator manual for rated loads, PTO speeds, and maintenance intervalsThis part shows how to use operator manuals to locate rated loads, PTO speeds, ballast and tyre details, and service schedules, making sure the tractor and implements are set up, run, and maintained just as the maker intended.
Locating safety, warning, and signal wordsFinding rated loads and ballast requirementsIdentifying correct PTO speeds and directionsReading lubrication and service schedulesUsing implement manuals with the tractorLesson 2Tyre inspection and pressure: tyre condition, tread, sidewall damage, inflation for field and road workYou will discover how to examine tractor tyres for cuts, bulges, tread wear, and correct air pressure. This part covers adjusting pressures for farm or road use, matching dual tyres, and spotting dangerous tyre issues that need fixing.
Inspecting tread depth and even wear patternsChecking sidewalls for cuts and bulgesMeasuring and adjusting tire pressuresSetting pressures for field versus road useInspecting valve stems, caps, and leaksLesson 3Pre-start checklist practice: preparing and following a written checklist and recording defects for repairThis part builds a proper pre-start habit using a written list. You will practise going through each step properly, noting faults, marking unsafe gear, and reporting repair needs before starting the tractor.
Building a tractor-specific checklist formSequencing checks from cab to groundRecording defects clearly and completelyTagging and locking out unsafe equipmentCommunicating issues to maintenance staffLesson 4Implement mount and attachment checks: correct hitching (three-point, drawbar), securing pins, PTO shaft guard, implement conditionThis part concentrates on safe fitting and checking of implements. You will verify the right hitch type, fasten pins and chains, ensure guarded PTO shafts, hydraulic links, and overall implement state before farm work.
Identifying hitch types and capacity limitsSecuring hitch pins, clips, and safety chainsInspecting PTO shafts and guardingChecking hydraulic hoses and couplersVerifying implement level and clearanceInspecting blades, tines, and wear partsLesson 5Safety devices and emergency equipment: fire extinguisher, first-aid, horn, mirrors, warning triangles, and battery isolationHere you will check that all safety and emergency items are in place, easy to reach, and working well. You will inspect fire extinguishers, first-aid boxes, horns, mirrors, warning triangles, and battery cut-off switches for readiness.
Inspecting and mounting fire extinguishersChecking first-aid kit contents and accessTesting horn, backup alarm, and beaconsAdjusting mirrors for full rear visibilityLocating and testing battery isolation switchLesson 6Operator controls and instruments: locating and testing brakes, clutch, throttle, transmission, PTO, hydraulic controls, lights and reflectorsThis part deals with finding, knowing, and testing all main controls and gauges. You will confirm proper function of brakes, clutch, throttle, gearbox, PTO, hydraulics, and lights before driving the tractor or using implements.
Locating primary driving and steering controlsTesting service and parking brakes safelyChecking clutch, throttle, and engine responseVerifying transmission ranges and gear selectionTesting PTO engagement and safety interlocksChecking lights, flashers, and warning indicatorsLesson 7Fluid checks: engine oil, coolant, hydraulic fluid, fuel — acceptable levels and indicatorsYou will learn to check engine oil, coolant, hydraulic fluid, and fuel using dipsticks, sight glasses, and gauges. This part explains safe levels, signs of dirt, and when to report or fix low amounts.
Locating dipsticks, sight glasses, and capsChecking engine oil level and conditionInspecting coolant level and freeze protectionVerifying hydraulic and transmission levelsChecking fuel level, filters, and water trapsLesson 8ROPS, cab and seat belt checks: correct installation, integrity, locking mechanism and correct use of seat beltHere you will learn to confirm that ROPS, cab, and seat belt systems are properly fitted, not damaged, and working. You will practise correct seat belt use, understand rollover risks, and know when ROPS should never be altered.
Identifying approved ROPS and cab labelsChecking ROPS mounts, bolts, and structureInspecting cab glass, doors, and latchesTesting seat belt webbing and bucklesCorrect seat belt use with ROPS-equipped cabsLesson 9Around-tractor walkaround: visual checks for leaks, damage, loose parts, obstructionsThis part teaches a proper walkaround to find leaks, damage, loose bits, and blockages. You will learn to look under the tractor, around implements, and in the work area before starting or moving.
Scanning for fluid leaks under tractorChecking steps, handholds, and platformsInspecting guards, shields, and panelsLooking for loose or missing fastenersClearing tools, debris, and bystanders