Lesson 1Hardener pick and resin-to-hardener amounts — mix rules, measuring right, and effects of amount mistakesLook into how hardeners control cure speed and final ways. You go learn right resin-to-hardener amounts, how to measure by weight or space, mix well, and spot, stop, and fix amount and mixing mistakes.
Mix rules basics for two-part resin systemsPicking slow, middle, or fast hardenersWeighing over space measuring waysMixing steps to avoid unmixed linesSigns and fixes for wrong-amount resin curesLesson 2Basic first help and emergency answer for resin touch, skin contact, and breathing inDis part outline basic first help and emergency steps for resin touch. You go learn how to answer to skin and eye touch, breathing vapors, accident swallow, and big spills, and when to find pro medical help.
Spotting early signs of skin feelQuick steps for skin and eye touchAnswering to breathing and air issuesHandling accident swallow happeningsSpill answer, hold, and reportLesson 3Picking right resin system for small making: thickness, work time, yellow stop, and food-safe thinksLearn how to pick resin systems for small making by comparing thickness, work and cure times, yellow stop, and food-touch safety. Understand marks, certs, and trade-offs between clear, hard, and strong.
Reading resin tech sheets and marksThickness, self-flat, and bubble let goWork time, gel time, and full cure timesSun light steady, yellow stop, and clearFood-touch claims, tests, and safe use limitsLesson 4Compare of resin types: epoxy, poly, and sun-cure resins — ways, pot life, cure act, and usual usesCompare epoxy, poly, and sun-cure resins for craft use. You go look at smell, poison, cure speed, shrink, clear, hard, and pot life, and match each resin type to shapes, covers, jewelry, and other small-batch works.
Main mix and cure ways overviewPot life, gel time, and heat diffShrink, hard, and break trade-offsSmell, out-go, and health danger compareBest-fit uses for each resin familyLesson 5Common extras: colors (mica, liquid dyes), inks, alcohol inks, shines, metal powders — how dem work with resin mixFind how colors, dyes, inks, shines, and metal powders work with resin mix. You go learn load limits, spread ways, effects on cure, and how to avoid clump, sink, or surprise color change.
Diff between dyes, colors, and inksMatch over risk extra mixesGood load percent by typeMixing ways for no-line spreadEffects on cure time, hard, and clearLesson 6Safe work space set: spill hold, work face protect, heat sources and fire danger, store and throw resin wasteDis part guide you in setting safe resin work space. You go plan spill hold, protect benches and floors, manage heat sources and fire danger, and store, mark, and throw resin, cleaners, and dirty waste right.
Picking good room or work areaSpill trays, covers, and face protectManaging heat sources and fire start dangerSafe store of resins, hardeners, and cleanersMarking, separate, and waste throw stepsLesson 7Add-ins and embed materials: dry flowers, metal charms, paper, cloth — match, seal, and move dangerUnderstand how to safe embed flowers, metals, paper, and cloths in resin. You go check match, pre-dry and seal hole things, stop color run and rust, and control float, bubbles, and long-time move issues.
Drying and ready organic add-insSealing paper, cloth, and hole facesStopping metal dark and rust in resinPlacing add-ins and control floatAvoiding color run and softener moveLesson 8Personal protect gear (PPE) and build controls: breathers (organic vapor/part), nitrile gloves, eye protect, air flow plansLearn how to protect self from resin danger using PPE and build controls. Dis part cover breather types, glove pick, eye and skin protect, and real air flow plans for small inside craft spaces.
Finding key resin health and safety dangerPicking and fit organic vapor breathersSelecting gloves, arms, and eye protectLocal out-go, fans, and air flow patternsHouse clean and clean ways to cut touch
