Lesson 1Tires and wheels inspection: tread depth and wear pattern analysis, sidewall damage, wheel runout and balance checksZero in pon detailed tire an wheel inspection fi racing, coverin tread depth, wear patterns, sidewalls, beads, runout, an balance. Link seen conditions to setup, driving style, an potential safety issues.
Measure tread depth across tire widthInterpret wear patterns versus alignmentInspect sidewalls, beads and inner linersCheck wheel radial and lateral runoutVerify wheel balance and hub fitmentLesson 2Tools and test gear for engine/fuel checks: multimeter, compression tester, fuel pressure gauge, borescope, timing lightBring in key tools an test gear fi engine an fuel checks, includin multimeters, compression an leak tools, pressure gauges, borescopes, an timing lights, wid emphasis pon safe use an accurate readin a results.
Use a multimeter for sensors and groundsPerform compression and leak‑down testsMeasure and log fuel pressure under loadInspect cylinders and valves with borescopeSet and verify ignition timing with lightLesson 3Tools for drivetrain checks: torque wrench, dial indicator, feeler gauges, gearbox fluid sampling and magnet inspectionCover specialized tools fi drivetrain checks, includin torque wrenches, dial indicators, feeler gauges, an fluid sampling. Lock in detectin early wear, backlash, an contamination before costly failures hit.
Apply torque wrenches to critical fastenersUse dial indicators for backlash and runoutMeasure clearances with feeler gaugesSample and inspect gearbox and diff fluidsCheck magnets and strainers for debrisLesson 4Tools for chassis checks: alignment gauges, camber/caster plates, corner weight scales, dial indicators, pry barsSpell out specialized tools fi precise chassis checks, includin alignment, camber, caster, toe, an corner weights. Explain correct setup, calibration, an data recordin to back repeatable race setups an post-event analysis.
Use string and laser alignment gaugesSet and read camber and caster platesOperate corner weight scales correctlyApply dial indicators for chassis deflectionUse pry bars to detect hidden playLesson 5Suspension, steering and brakes inspection: bushings, ball joints, damper condition, brake pad wear, disc runout and caliper functionExplain systematic inspection a suspension, steering, an brakes pon race cars. Zero in pon bushings, joints, dampers, pads, discs, an calipers, linkin measured wear an play to handling, safety, an braking consistency.
Check control arm bushings and complianceInspect ball joints and tie‑rod end playEvaluate damper leaks and stroke consistencyMeasure brake pad thickness and taperCheck disc runout and caliper slide functionLesson 6Engine and fuel system checklist: visual, compression/lean tests, ignition components, fuel pressure and filter inspectionProvide a structured engine an fuel system checklist fi race prep, includin visual checks, compression an mixture evaluation, ignition components, fuel pressure, filters, an leak points to lock in consistent performance.
Perform external visual and leak inspectionVerify compression and basic mixture healthInspect coils, plugs, leads and connectorsCheck fuel pressure, regulator and returnInspect and replace fuel filters as neededLesson 7Drivetrain and gearbox inspection: shafts, mounts, shifting mechanism, fluid checks and gearbox endplay measurementCover race drivetrain an gearbox inspection, includin shafts, mounts, linkages, fluids, an endplay. Lock in safe liftin, contamination control, accurate measurements, an documentin wear trends fi preventive maintenance.
Inspect driveshafts, CV joints and flangesCheck engine, gearbox and differential mountsVerify shifter cables, linkages and detentsMeasure gearbox endplay and bearing preloadAssess lubricant level, condition and leaksLesson 8Tools for tire/wheel work: pyrometer, tire pressure gauge, dynamic balancer or static methods, valve tools, torque wrenchDescribe tools use fi tire an wheel work in competition, includin pyrometers, pressure gauges, balancers, valve tools, an torque wrenches, highlightin correct techniques fi repeatable grip an reliability.
Use a tire pyrometer for temperature profilesSet and log hot and cold tire pressuresBalance wheels with static and dynamic methodsService valves, cores and pressure bleedsTorque wheel fasteners in correct sequence
