Lesson 1PPE selection for petrol vs battery saws and working near roads or public areasExplains how PPE needs differ for petrol and battery saws, including vibration, noise, and weight considerations. Covers extra requirements when working near roads or the public, such as high-visibility, signage, and traffic control PPE, in line with Canadian road safety standards.
PPE implications of petrol vs battery sawsNoise and vibration differences and impactExtra PPE for roadside and traffic workProtecting bystanders and public areasSelecting PPE for confined or urban sitesLesson 2Eye and face protection: safety glasses, face shields, anti-fog and impact ratingsReviews eye and face protection options, including safety glasses, goggles, and face shields. Explains impact ratings, side coverage, anti-fog features, and compatibility with helmets and respirators in wet, cold, or dusty conditions common in Canadian climates.
Impact and penetration rating markingsSide shields and wraparound coverageWhen to add a full face shieldAnti-fog coatings and care routinesCompatibility with respirators and helmetsLesson 3PPE maintenance and inspection: inspection checklist, serviceable vs defective criteria, replacement scheduleProvides a structured PPE inspection approach, including checklists for helmets, hearing, eye, leg, hand, and foot protection. Clarifies serviceable versus defective criteria, cleaning, storage, and setting a realistic replacement schedule for harsh Canadian environments.
Daily pre-use PPE inspection routineDefect criteria for each PPE categoryCleaning methods that avoid damageStorage to prevent UV and heat agingTracking service life and replacement datesLesson 4Foot protection: safety boots with chainsaw protection, toe and sole standardsFocuses on chainsaw safety boots, including cut-resistant uppers, toe caps, and puncture-resistant soles. Explains relevant standards, slip resistance, fit, lacing, and how to choose boots for wet ground, steep slopes, or winter work in Canada.
Chainsaw cut protection zones in bootsSteel vs composite toe cap optionsPuncture-resistant midsole requirementsSlip resistance and outsole tread designFit, ankle support and lacing methodsLesson 5Head protection: hard hats, bump caps, helmet-mounted visors and selection criteriaExplores hard hats, bump caps, and forestry helmets, focusing on impact and penetration standards. Covers helmet-mounted visors, suspension adjustment, service life, and how to select head protection for felling, limbing, and ground work in varied Canadian terrains.
ANSI and EN standards for helmetsWhen bump caps are not acceptableForestry helmet systems and componentsAdjusting suspension and chin strapsVisor types and compatible eye protectionLesson 6Leg protection: chainsaw chaps and trousers classes, coverage zones and limitationsDetails chainsaw chaps and trousers, including protection classes, coverage zones, and how cut-resistant fibers work. Reviews fit, donning, and known limitations, such as kickback angles, side exposure, and risks when working from ladders in Canadian forestry.
Protection classes and chain speed ratingsFront, side and rear coverage zonesChap vs trouser selection for tasksFit, length and securing around bootsKnown failure modes and misuse risksLesson 7Hand protection: chainsaw-resistant gloves, cut resistance ratings and dexterity considerationsCovers chainsaw glove types, cut resistance ratings, and how protection is balanced with dexterity and grip. Discusses left-hand protection emphasis, water resistance, sizing, and when lighter gloves may be acceptable for control in cold Canadian conditions.
Cut resistance levels and test methodsLeft-hand specific chainsaw glove designBalancing protection with fine controlGrip performance in wet or oily conditionsSizing, cuff length and secure closureLesson 8High-visibility clothing and torso protection: visibility classes and layering for weatherExplains high-visibility clothing classes for roadside and forestry work, plus torso protection options such as chainsaw jackets. Covers layering for heat, cold, and rain while maintaining visibility, mobility, and access to harness points in Canada's diverse weather.
Hi-vis color, retroreflective tape and classesHi-vis requirements near traffic and publicChainsaw jackets and shoulder protectionLayering for heat, cold and rain controlMaintaining visibility when gear is soiledLesson 9Hearing protection: earmuffs vs earplugs, required attenuation and fit testing basicsCovers earmuffs and earplugs for chainsaw use, including how noise levels guide required attenuation. Explains fit testing basics, compatibility with helmets and visors, and common mistakes that reduce real-world hearing protection in noisy Canadian sites.
Chainsaw noise levels and dB exposure limitsSingle Number Rating and derating in practiceChoosing earmuffs vs earplugs for tasksFit testing basics and quick seal checksCompatibility with helmets and face shields
