Lesson 1Shrinkage and curing behaviour: volumetric and moulded shrinkage, cure kinetics, exotherm management, and post-cure considerationsThis section explains thermoset shrinkage and curing behaviour, covering volumetric and moulded shrinkage, cure kinetics, exotherm control, and post-cure strategies, and shows how these factors influence tool design, tolerances, and part stability.
Volumetric versus molded shrinkageCure kinetics and degree of conversionExotherm management in thick sectionsMold design for shrinkage compensationPost‑cure cycles and property developmentLesson 2Interpreting technical data sheets (TDS) for thermoset moulding compounds: Tg, cure schedule, recommended mould temps, viscosity and flow dataThis section teaches how to read thermoset technical data sheets, focusing on Tg, cure schedules, recommended mould temperatures, viscosity and flow data, and how to translate these parameters into robust moulding windows and tooling decisions.
Locating key data sheet parametersInterpreting Tg and heat deflection dataCure schedule and mold temperature windowsViscosity, spiral flow, and gel time dataLinking TDS values to process settingsLesson 3Key material properties relevant to switch housings: thermal stability, dielectric strength, mechanical strength, glass transition temperature, coefficient of thermal expansion, and moisture uptakeThis section explains which thermoset properties matter most for switch housings, including thermal stability, dielectric strength, mechanical performance, Tg, CTE, and moisture uptake, and how these parameters influence design margins and testing.
Thermal stability and long‑term heat resistanceDielectric strength and tracking resistanceMechanical strength and impact performanceGlass transition temperature and service windowCTE, moisture uptake, and dimensional changeLesson 4Design guidelines for thin ribs, bosses, and wall transitions to avoid incomplete filling and warpageThis section details rib, boss, and wall geometry for thermoset switch housings, focusing on flow paths, knit lines, and stress concentrations to prevent short shots, sinks, warpage, and cracking under thermal and mechanical loads.
Recommended wall and rib thickness ratiosBoss design for inserts and screw retentionFillets, radii, and smooth wall transitionsGate location impact on filling thin featuresDraft angles and demolding of brittle partsLesson 5Material handling and storage: moisture, preheating/drying requirements, pot life or shelf life of moulding compounds and prepregsThis section addresses storage and handling of thermoset moulding compounds and prepregs, including moisture sensitivity, preheating or drying, pot life, shelf life, and traceability practices that preserve consistent flow and cure behaviour in production.
Storage temperature and humidity controlsPackaging, sealing, and labeling practicesPreheating and drying of molding compoundsPot life management during shift operationsShelf life, requalification, and traceabilityLesson 6Typical additives and fillers: reinforcements (glass fibres, mineral fillers), flame retardants, colourants — effects on flow, cure, and final propertiesThis section reviews common additives and fillers in thermoset compounds for switch housings, such as glass fibres, mineral fillers, flame retardants, and colourants, and explains their effects on viscosity, cure, mechanical strength, and electrical behaviour.
Glass fiber reinforcement and orientationMineral fillers and dimensional stabilityFlame retardant systems and UL ratingsColorants, pigments, and surface appearanceAdditive effects on flow and cure kineticsLesson 7Overview of common thermoset families: phenolic (PF), melamine (MF), unsaturated polyester (UP), and epoxy — chemistry and crosslinking mechanismsThis section introduces major thermoset families used in switch housings, including phenolic, melamine, unsaturated polyester, and epoxy systems, outlining their base chemistry, cure reactions, crosslink density, and typical performance envelopes.
Phenolic resins: novolac and resol systemsMelamine and related amino thermosetsUnsaturated polyester molding compoundsEpoxy molding compounds for switchgearCrosslink density and network structureLesson 8Environmental, health, and regulatory material considerations: fumes, emissions during cure, and relevant material safety data sheet (MSDS) items to noteThis section covers fumes and emissions during thermoset curing, key MSDS and SDS items, workplace exposure limits, ventilation, PPE, and regulatory frameworks that govern safe handling of moulding compounds in electrical component production.
Typical emissions during thermoset curingKey MSDS and SDS sections for operatorsVentilation and local exhaust requirementsPersonal protective equipment for moldingRegulatory exposure limits and complianceLesson 9Comparison: why thermosets are chosen over thermoplastics for low-voltage switchgear — dimensional stability, heat resistance, flame retardancy, and ageingThis section compares thermosets with thermoplastics for low-voltage switchgear, highlighting advantages in dimensional stability, heat resistance, flame retardancy, and ageing behaviour, and explaining trade-offs in processing, recyclability, and cost.
Dimensional stability under load and heatHeat resistance and thermal index ratingsFlame retardancy and glow‑wire performanceCreepage, tracking, and insulation ageingProcessing, recyclability, and cost trade‑offsLesson 10Failure modes specific to thermosets: internal cracking, embrittlement, surface defects, and environmental degradationThis section examines failure modes specific to thermoset switch housings, including internal cracking, embrittlement, surface defects, and environmental degradation, and links each mode to root causes in design, material choice, and processing.
Internal cracking and residual stressesEmbrittlement from ageing and over‑cureSurface defects, sinks, and flow marksEnvironmental stress and chemical attackInspection, testing, and failure analysis
