Basic Mechanic Course

Lesson 1 • Shop Safety and Hazard Awareness

Covers personal protective equipment, chemical handling, and fire prevention in the shop. Safety compliance underpins every hands-on task in the course.

Lesson 2 • The Mechanic's Role and Workplace

Defines the professional responsibilities of an automotive mechanic and shop environment standards. Sets context for all technical skills developed throughout the course.

Lesson 3 • Reading Service Documentation

Teaches students to locate and interpret manufacturer service manuals, wiring diagrams, and technical bulletins. Accurate documentation use prevents misdiagnosis and incorrect repairs.

Lesson 1 • Screwdrivers, Pliers, and Specialty Tools

Covers hand tools used for gripping, cutting, and driving fasteners in confined spaces. Proper tool matching reduces component damage during disassembly and assembly.

Lesson 2 • Lifting Equipment and Shop Machines

Covers floor jacks, jack stands, vehicle lifts, and bench equipment operation. Safe lifting procedures protect both the technician and the vehicle during service.

Lesson 3 • Tool Maintenance and Storage

Establishes routines for cleaning, inspecting, and storing tools to extend service life. Well-maintained tools ensure consistent accuracy and reduce workplace hazards.

Lesson 4 • Wrenches, Sockets, and Fasteners

Identifies wrench and socket types, drive sizes, and fastener standards. Correct tool selection prevents fastener damage and ensures proper torque application.

Lesson 1 • Visual Engine Inspection Procedures

Teaches systematic external inspection for leaks, cracks, belt wear, and fluid levels. Structured inspection habits catch developing problems before they cause major damage.

Lesson 2 • Engine Cooling System Basics

Explains coolant circulation, thermostat function, radiator operation, and water pump role. Cooling system health directly affects engine temperature control and longevity.

Lesson 3 • Engine Components and Their Functions

Identifies pistons, connecting rods, crankshaft, camshaft, and valvetrain parts. Component knowledge guides correct disassembly sequences and parts ordering.

Lesson 4 • Four-Stroke Engine Operation

Explains intake, compression, power, and exhaust strokes and their mechanical relationships. Understanding the cycle is the basis for diagnosing engine performance problems.

Lesson 1 • Fuel Injector Testing and Service

Teaches fuel pressure testing, injector balance testing, and cleaning procedures. Injector performance directly affects fuel economy, emissions, and engine power output.

Lesson 2 • Ignition Timing and Misfire Diagnosis

Teaches timing verification using a scan tool and oscilloscope, and misfire isolation techniques. Accurate timing diagnosis prevents unnecessary component replacement and repeat failures.

Lesson 3 • Ignition System Fundamentals

Explains primary and secondary ignition circuits, coil operation, and spark plug function. Ignition system knowledge is required before performing timing or misfire diagnosis.

Lesson 4 • Fuel System Components and Operation

Covers fuel tank, pump, filter, pressure regulator, and injector roles in fuel delivery. Understanding fuel flow is prerequisite to accurate pressure and injector testing.

Lesson 1 • Starting System Diagnosis

Explains starter motor operation, solenoid function, and no-crank fault isolation procedures. Starting system faults are diagnosed by voltage drop and component substitution methods.

Lesson 2 • Circuit Fault Isolation Techniques

Teaches open, short, and high-resistance fault location using wiring diagrams and test lights. Systematic fault isolation reduces diagnostic time and prevents misdiagnosis.

Lesson 3 • Electrical Theory for Mechanics

Introduces voltage, current, resistance, and Ohm's Law as applied to vehicle circuits. These principles are the foundation for every electrical test performed in later sections.

Lesson 4 • Multimeter Operation and Testing

Teaches DC and AC voltage, resistance, and continuity testing with a digital multimeter. Correct meter use prevents component damage and yields accurate diagnostic readings.

Lesson 1 • Hydraulic System Bleeding

Covers manual, pressure, and vacuum bleeding methods to remove air from brake lines. Air-free hydraulic circuits produce a firm pedal and consistent brake response.

Lesson 2 • Drum Brake Inspection and Adjustment

Teaches shoe inspection, wheel cylinder testing, drum measurement, and self-adjuster service. Proper drum brake adjustment ensures even lining contact and effective parking brake function.

Lesson 3 • Brake System Principles

Explains hydraulic force multiplication, brake bias, and the role of the master cylinder. Understanding hydraulic principles is required before performing any brake service.

Lesson 4 • Parking Brake and ABS Overview

Explains parking brake cable adjustment and introduces ABS modulator and wheel speed sensor roles. ABS awareness prepares students for advanced brake diagnostics in later training.

Lesson 1 • Suspension System Types and Components

Identifies MacPherson strut, double-wishbone, and solid-axle suspension designs and their parts. Component identification is prerequisite to correct inspection and replacement procedures.

Lesson 2 • Wheel Bearing Inspection and Replacement

Covers hub-unit and serviceable bearing inspection, preload adjustment, and installation torque. Correct bearing preload prevents overheating, noise, and wheel separation risk.

Lesson 3 • Wheel Alignment Fundamentals

Explains camber, caster, toe, and thrust angle and their effects on handling and tire wear. Alignment measurement confirms whether suspension repairs restored correct geometry.

Lesson 4 • Ball Joints, Tie Rods, and Bushings

Teaches wear measurement, play testing, and replacement of ball joints, tie rod ends, and bushings. Worn linkage components cause steering wander and uneven tire wear patterns.

Lesson 1 • Fluid Inspection and Replacement

Teaches condition and level checks for coolant, transmission, power steering, and brake fluids. Fluid condition analysis identifies developing system problems before component failure occurs.

Lesson 2 • Engine Oil and Filter Service

Covers drain plug removal, filter replacement, oil fill, and post-service leak inspection. Oil service is the most frequent maintenance task and must be performed without error.

Lesson 3 • Maintenance Schedule Interpretation

Teaches reading manufacturer maintenance schedules based on mileage, time, and driving conditions. Correct schedule interpretation prevents under-maintenance and unnecessary service costs.

Lesson 4 • Multi-Point Inspection and Documentation

Teaches systematic vehicle inspection using a standardised checklist and condition rating system. Accurate documentation supports customer trust and creates a legal service record.