Building Engineer Course

Lesson 1 • Regulatory and Compliance Framework

Surveys building codes, safety standards, and inspection requirements that govern operations. Establishes the compliance mindset applied in every chapter.

Lesson 2 • Safety Fundamentals for Engineers

Covers personal protective equipment, lockout/tagout, and hazard communication. Safety practices introduced here are reinforced in all technical chapters.

Lesson 3 • Building Documentation and Drawings

Covers how to read blueprints, as-built drawings, and equipment schedules. Enables engineers to locate and interpret critical building information.

Lesson 4 • Building Systems Overview

Introduces mechanical, electrical, plumbing, and structural systems as interconnected components. Provides the conceptual map used throughout the course.

Lesson 1 • Preventive Maintenance for HVAC

Establishes scheduled maintenance tasks, lubrication, filter replacement, and coil cleaning. Reduces equipment downtime and extends service life.

Lesson 2 • HVAC Troubleshooting and Diagnostics

Applies systematic fault-finding methods to common HVAC failures. Engineers can isolate root causes and restore comfort conditions efficiently.

Lesson 3 • Air Distribution and Ventilation

Covers ductwork design, airflow balancing, and ventilation standards for indoor air quality. Connects system design to occupant comfort and code compliance.

Lesson 4 • HVAC Principles and Components

Explains thermodynamic principles, refrigeration cycles, and key equipment types. Provides the technical foundation for all HVAC maintenance tasks.

Lesson 1 • Electrical Theory and Safety

Reviews AC/DC fundamentals, Ohm's law, and electrical hazard controls. Establishes the safety discipline required before any hands-on electrical work.

Lesson 2 • Lighting Systems Management

Addresses lamp types, ballasts, drivers, and lighting controls for energy efficiency. Connects lighting maintenance to tenant satisfaction and energy goals.

Lesson 3 • Electrical Testing and Troubleshooting

Teaches use of multimeters, clamp meters, and thermal imaging for fault diagnosis. Engineers can identify and document electrical deficiencies safely.

Lesson 4 • Emergency and Backup Power Systems

Explains generators, automatic transfer switches, and uninterruptible power supplies. Prepares engineers to test and maintain life-safety power systems.

Lesson 1 • Plumbing System Fundamentals

Introduces supply, drainage, waste, and vent system principles. Provides the conceptual framework for all plumbing maintenance and troubleshooting tasks.

Lesson 2 • Water Heating Systems

Covers storage, tankless, and heat-pump water heaters including controls and safety devices. Engineers can maintain systems and prevent scalding or Legionella risks.

Lesson 3 • Plumbing Repairs and Emergency Response

Covers pipe repair methods, valve operation, and water shutoff procedures for emergencies. Builds rapid-response skills that minimise water damage.

Lesson 4 • Pumps and Water Pressure Management

Explains centrifugal pump operation, pressure-reducing valves, and booster systems. Ensures engineers can maintain adequate pressure throughout the building.

Lesson 1 • Windows, Doors, and Hardware

Covers adjustment, weatherstripping, and hardware maintenance for windows and doors. Ensures proper operation, security, and energy efficiency.

Lesson 2 • Exterior Wall and Facade Maintenance

Addresses masonry, curtain wall, caulking, and sealant maintenance to prevent water intrusion. Connects envelope integrity to interior protection and energy performance.

Lesson 3 • Structural Elements and Monitoring

Introduces columns, beams, slabs, and foundations and how to identify distress signs. Engineers can recognize structural concerns and escalate appropriately.

Lesson 4 • Interior Finishes and Common Areas

Covers flooring, ceiling tiles, wall finishes, and common-area upkeep standards. Maintains tenant satisfaction and property value through proactive care.

Lesson 1 • Fire Safety Coordination and Drills

Addresses fire safety plans, tenant drills, and coordination with fire authorities. Builds the organizational skills needed to manage building-wide safety programs.

Lesson 2 • Fire Suppression System Fundamentals

Covers wet-pipe, dry-pipe, and pre-action sprinkler systems and their components. Provides the technical base for all inspection and testing tasks.

Lesson 3 • Suppression System Inspection and Testing

Details inspection frequencies, flow tests, and impairment procedures for sprinkler systems. Ensures systems are always ready for activation.

Lesson 4 • Egress, Signage, and Emergency Lighting

Covers exit routes, emergency lighting, and exit sign maintenance requirements. Engineers can verify life safety egress systems are functional at all times.

Lesson 1 • Alarms, Trending, and Diagnostics

Explains alarm management, data trending, and fault detection through the BAS. Engineers can use system data to identify inefficiencies and equipment faults.

Lesson 2 • Energy Conservation Measures

Covers lighting retrofits, HVAC optimization, and demand response strategies. Engineers can implement and verify low-cost and capital energy improvements.

Lesson 3 • Energy Auditing and Benchmarking

Teaches utility data collection, energy use intensity calculation, and benchmarking tools. Engineers can identify high-consumption areas and prioritize improvements.

Lesson 4 • Building Automation System Fundamentals

Introduces BAS architecture, controllers, sensors, and communication protocols. Provides the foundation for navigating and programming automation systems.

Lesson 1 • Contractor and Vendor Management

Addresses scope of work writing, contractor qualification, and performance monitoring. Engineers can manage service contracts to ensure quality and compliance.

Lesson 2 • Preventive Maintenance Programme Design

Covers asset inventories, PM task libraries, and frequency determination for all building systems. Engineers can build and sustain a structured PM program.

Lesson 3 • Computerized Maintenance Management Systems

Introduces CMMS platforms for work order creation, tracking, and reporting. Engineers can use CMMS data to measure program effectiveness.

Lesson 4 • Continuous Improvement and Reporting

Introduces root cause analysis, reliability metrics, and management reporting formats. Engineers can drive ongoing improvements and communicate results to ownership.